Home News Contact

 

Square Footage Calculator


*These calculations are based on an average spread rate of 150 sq. ft, with three coats of Nansulate, per U.S. gallon over a fairly smooth surface.

Your actual spread rate may vary depending on the surface irregularities, porosity and material loss when mixing.

You may enter up to 2 decimal places but please don't include commas.

    FOR PIPES :
    1. Measure the Diameter of the Pipe.
      Enter the diameter in inches (no commas)


    2. Measure the length of pipe to be coated.
      Enter the number of feet (no commas)


  Gallons*

FOR INTERIOR WALLS :
1. Measure the HEIGHT of the room from baseboard to ceiling, or to molding if there is a drop ceiling.

    Enter the number of feet (no commas)


2. Measure the distance around the room,(the total length of all four walls)
    Enter the number of feet (no commas)

  Gallons*
    FOR CEILINGS :
    1. Measure the LENGTH of the ceiling.

      Enter the number of feet (no commas)

    2. Measure the WIDTH of the ceiling.

      Enter the number of feet (no commas)

  Gallons*
EXTERIOR WALLS:
    1. Measure the HEIGHT of the building from foundation to roof line. Add 2 feet to height if there are gables.

      Enter the number of feet (no commas)

    2. Measure the DISTANCE around the building.

      Enter the number of feet (no commas)

  Gallons*

 

 

 

 

liquid insulation for pipes, tanks, walls and more

About Us - Research - Nansulate Overview - TranslucentPT - TranslucentGP - Translucent HH - TopCoat - NanoPrime - Order - Calculator - FAQ - Downloads - Nanotechnology - How It Works - ExamplesPT - ExamplesGP - ExamplesHH - Find A Distributor - Become A Distributor - Investor Relations - Press Room - Products by Application - Case Studies

Nansulate® is Patented technology protected by U.S. and international Patents.

©Copyright 2008 Industrial-Nanotech, Inc. All Rights Reserved. For more information Contact Us. Read our Privacy Policy