• For use as a top coating to our Nansulate® Translucent line, for added pipe insulation value and when a smooth semi-gloss white finish is desired.
• Ease of Application: Preferred application method is by brush or roller, alhtough an airless sprayer at low pressure can be used and is easily applied by individuals.

$56.95 per gallon

Application Temperature Range: 40F to 212F (4C to 100C)

Note: Products are sold by weight, not volume.

Coverage: 525 sq ft with 1 Coat.

Application Instructions

Material Safety Data Sheet

FAQ Page

Warranty Information

Testing & Specifications

WEIGHT/GALLON: 5.96 lbs/gal
VISCOSITY: 4000 cps
GRIND: 5 Hegman
DENSITY, #/gal 8.5
SPECIFIC GRAVITY 1.02
WEIGHT SOLIDS: 40%
VOLUME SOLIDS: 40.1%
COVERAGE: 1600 sq ft/gl @ 1.0 mil
530 sq ft/gl @ 3.0 mil
SUBSTRATE PREP.: SSPC 2- Hand Tool Clean
APPLICATION METHOD: Airless spray, Brush, Roll
EQUIPMENT SETTINGS: Adjust air pressure for a consistent film thickness.
APPLIED OVER: In exterior applications, use over suitable primer
USED UNDER: N/A
RECOMMENDED REDUCTION: None
REDUCER: Water
REDUCED VISCOSITY: As needed for application
RECOMMENDED FILM THICKNESS:
WET: 3-5 mils
DRY: 1.5-2.5 mils
FLASH TIME: 20 minutes
BAKE TIME: N/A
BAKE TEMPERATURE Air Dry
OVEN TYPE: N/A
GLOSS: 10-20
HARDNESS: N/A
IMPACT RESISTANCE: N/A

UV Test: ASTM D 4587 Florescent – UV Condensation Exposure of Paint and Related Coatings: 400 hrs – Passed

Flame/Smoke: Flame Spread – Class “A”
Smoke Developed – Class “A”

Adhesion Test: ASTM 3359 Cross Hatch Adhesion – Method B
No loss of adhesion.